(1).png?w=2643&h=1585){kind=logo}
Board Card OptiX OSN 9800 U Series 5G Network 4-Port 100/200/400G Line Service Processing Board TNS2N504 DWDM Compliant CFP
$1,699.67 USD
Изчисляване на таксата за доставка при плащането
Количество
Products Description
Description
TNS2N504 4-port 100/200/400G Line Service Processing Board
Applied to OSN 9800 M24, U32 and U64, it supports relay mode and line mode
TNS2N504 board supports Optical-layer ASON
TNS2N504 board supports physical clock and Loopback, Protection scheme of ODUk SNCP, tributary SNCP protection and intra-board 1+1 protection (when working with the OLP or DCP board) only working in line mode
TNS2N504 is a 4-port 100/200/400G line service board.The N504 board processes and converts the received service signals into four OTU4/OTUC2 or two OTUC4 signals, which are carried over ITU-T G.694.1-compliant DWDM wavelengths.The N504 board uses coherent receiving technologies and applies to coherent systems.
Applied to OSN 9800 M24, U32 and U64, it supports relay mode and line mode
TNS2N504 board supports Optical-layer ASON
TNS2N504 board supports physical clock and Loopback, Protection scheme of ODUk SNCP, tributary SNCP protection and intra-board 1+1 protection (when working with the OLP or DCP board) only working in line mode
TNS2N504 is a 4-port 100/200/400G line service board.The N504 board processes and converts the received service signals into four OTU4/OTUC2 or two OTUC4 signals, which are carried over ITU-T G.694.1-compliant DWDM wavelengths.The N504 board uses coherent receiving technologies and applies to coherent systems.
|
Functions and features (line mode)
|
|
|
|
|
||||
|
OTN functions
|
Port in 100G mode:
Supports the OTU4 interface on the WDM side. Supports the OTN frame format and overhead processing defined by ITU-T G.709. OTU4 layer: supports SM overhead processing. ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. Port in 200G mode: Supports the OTUC2 interface on the WDM side. OTUC2 layer: supports SM overhead processing. ODUC2 layer: supports PM and TCM overhead processing. ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. Port in 400G mode: Supports the OTUC4 interface on the WDM side. OTUC4 layer: supports SM overhead processing. ODUC4 layer: supports PM overhead processing. ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
|
|
|
||||
|
WDM specification
|
Supports ITU-T G.694.1-compliant DWDM specifications.
|
|
|
|
||||
|
Tunable wavelength function
|
The board supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
|
|
|
|
||||
|
PRBS test function
|
Supports the PRBS function on the WDM side.
|
|
|
|
||||
|
Regeneration board
|
Supported
|
|
|
|
||||
|
ESC
|
Supported
|
|
|
|
||||
|
Optical-layer ASON
|
Supported
|
|
|
|
||||
|
Electrical-layer ASON
|
Supported
|
|
|
|
||||
|
Loopback
|
WDM-Side Loopback supported.
Channel loopback: Port in 100G mode: ODUk (k = 0, 1, 2, 2e, 3, or flex) channel loopbacks Port in 200G mode or 400G mode: ODUk (k=0, 1, 2, 2e, 3, 4, flex) channel loopbacks. |
|
|
|
||||
|
Alarm and performance event monitoring
|
Monitors BIP8 bytes (Bursty mode) to help locate line failures.
|
|
|
|
||||
|
|
Monitors parameters such as the bias current, temperature, and optical power of the laser.
|
|
|
|
||||
|
|
Monitors OTN alarms and performance events.
|
|
|
|
||||
