(1).png?w=2643&h=1585){kind=logo}
TNU6N402 03033GDU OSN 9800 U64/U32/U16 and M24 2-Port 100G OTN Line Service Processing Board for 5G Network
$1,730.00 USD
Υπολογισμός των τελών αποστολής στο ταμείο κατά την ολοκλήρωση της αγοράς
Ποσότητα
Products Description
|
item
|
value
|
|
|
|
|
|
||||||
|
Type
|
TNU6N402
|
|
|
|
|
|
||||||
|
Basic function
|
Supports the following service conversions:
160xODU0/80xODU1/20xODU2/20xODU2e/4xODU3/2xODU4/160xODUflex<->2xOTU4 Each port on the board supports a mix of ODU0, ODU1, ODU3, ODU2, ODU2e, and ODUflex signals. |
|
|
|
|
|
||||||
|
Cross-connect capabilities
|
Supports backplane cross-connections of 160 ODU0, 80 ODU1, 20 ODU2, 20 ODU2e, 4 ODU3, 2 ODU4, or 160 ODUflex signals from/to the
cross-connect board. |
|
|
|
|
|
||||||
|
OTN functions
|
Supports OTU4 on the WDM side.
Supports the OTN frame format and overhead processing defined by ITU-T G.709. OTU4 layer: supports SM overhead processing. ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
|
|
|
|
|
||||||
|
WDM specification
|
Supports ITU-T G.694.1-compliant DWDM specifications.
|
|
|
|
|
|
||||||
|
Tunable wavelength function
|
Supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
|
|
|
|
|
|
||||||
|
ESC function
|
Supported
|
|
|
|
|
|
||||||
|
PRBS function
|
Supports the PRBS function on the WDM side.
|
|
|
|
|
|
||||||
|
FEC coding
|
SDFEC2
Boards that use different FEC modes cannot interconnect with each other. |
|
|
|
|
|
||||||
|
Alarms and performance events monitoring
|
Monitors BIP8 bytes (Bursty mode) to help locate line failures.
Monitors parameters such as the bias current, temperature, and optical power of the laser. Monitors OTN alarms and performance events. |
|
|
|
|
|
||||||
|
Regeneration board
|
Supported
|
|
|
|
|
|
||||||
|
Latency measurement
|
The board supports latency measurement in the WDM-side optical port direction (upstream direction).When higher-order ODUk
cross-connections are created on the line board, TCM section latency measurement is supported for higher-order ODUk channels.When lower-order ODUk cross-connections are created on the line board, PM/TCM section latency measurement is supported for higher-order ODUk channels, and TCM section latency measurement is supported for lower-order ODUk channels. |
|
|
|
|
|
||||||
|
Functions and features (relay mode)
|
|
|
|
|
|
|
||||||
|
Basic function
|
Electrically regenerates optical signals at an electrical REG station.
|
|
|
|
|
|
||||||
|
Supported service rate
|
OTU4: OTN service at a rate of 111.81 Gbit/s
|
|
|
|
|
|
||||||
|
OTN functions
|
Supports OTU4 on the WDM side.
Supports the OTN frame format and overhead processing defined by ITU-T G.709. OTU4 layer: supports SM overhead processing. ODU4 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
|
|
|
|
|
||||||
|
WDM specification
|
Supports ITU-T G.694.1-compliant DWDM specifications.
|
|
|
|
|
|
||||||
|
Tunable wavelength function
|
The board supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
|
|
|
|
|
|
||||||
|
ESC function
|
Supported
|
|
|
|
|
|
||||||
|
FEC coding
|
SDFEC2
Boards that use different FEC modes cannot interconnect with each other. |
|
|
|
|
|
||||||
|
Alarms and performance events monitoring
|
Monitors BIP8 bytes
(Bursty mode) to help locate line failures. Monitors parameters such as the bias current, temperature, and optical power of the laser. Monitors OTN alarms and performance events. |
|
|
|
|
|
||||||
