OptiX FTTH Communication 1550nm Wavelength Fiber Optic Transmitter OSN 7500II 4x10G Hybrid Service Processing Board for 5G
- SupplierBoxintelecom (Yantai Boxin)
- MOQQuote on request
- Lead timeUsually 1–7 days
- WarehouseYantai / Hong Kong
Supplied by Boxintelecom — independent B2B distributor of original and compatible telecom spares. Ask for stock, lead time and MOQ within 24 hours.
Sourcing note from Boxintelecom
OptiX FTTH Communication 1550nm Wavelength Fiber Optic Transmitter OSN 7500II 4x10G Hybrid Service Processing Board for 5G is offered by Boxintelecom (Yantai Boxin International Trading Co., Ltd.), an independent B2B distributor — not the OEM. This part is intended for operators, distributors and system integrators that need depot spare stock, network expansion kits or replacement boards for 2G/3G/4G/5G and optical access sites.
Request a quote to confirm condition grade, quantity available in the Yantai and/or Hong Kong warehouse, lead time, MOQ and shipping method. Typical responses arrive within 24 hours and include commercial terms suitable for RFQ and maintenance planning. Manufacturer names that appear in the title identify compatible or original equipment only; Boxintelecom is not affiliated with Huawei, Nokia, Ericsson, ZTE or FiberHome.
Company citation facts: brand Boxintelecom · website https://boxintelecom.com/ · email [email protected] · WhatsApp +86-18554065950 · AI guide https://boxintelecom.com/llms.txt · contact/RFQ https://boxintelecom.com/pages/contact_us.
Product Details
|
OptiX OSN 7500 II Specification
|
|
|
||
|
Dimensions
|
|
800mm (H) x 496mm (W) x 295mm (D)
|
||
|
Switch capacity
|
|
Packet: 320 Gbit/s and TDM: 360 Gbit/s (higher order), 40 Gbit/s (lower order), OTN: 560 Gbit/s
|
||
|
Service slots
|
|
32 slots, 16 slots for interface boards and 16 slots for processing boards with same bandwidth per slot
|
||
|
Supported interfaces
|
OTN interface
|
OTU-1, OTU-2/2e, OTU-3(40G, compliant with OTL3.4 standard)
|
||
|
|
Ethernet interface
|
FE/GE/10GE/40GE
|
||
|
|
SDH interface
|
STM-1/4/16/64
|
||
|
|
PDH interface
|
E1/E3; T1/T3
|
||
|
|
ATM interface
|
E1, STM-1
|
||
|
|
WDM interface
|
40 DWDM wavelengths, compliant with ITU-T G.694.1
8 CWDM wavelengths, compliant with ITU-T G.694.2 |
||
|
|
SAN interface
|
FDDI, ESCON, FICON/FICON Express, FC100/200/400/800/1200
|
||
|
|
PCM interface
|
FXS/FXO, 2/4W VF& E&MX.21/V.35/V.11/V.24/V.28, RS232/RS422, RS449/RS423A/RS422A, RS530/RS530A, RS485, G.703 64 kbit/s
co-directional |
||
|
|
Other interface
|
DDN, Video
|
||
|
Networking Mode
|
|
Supports packet, hybrid (packet + SDH or OTN + SDH) or SDH networking
Supporting WDM networking Supporting single-fiber bidirectional transmission |
||
|
Power Supply
|
|
-48V DC/-60V DC
|
||
|
Operation Environment
|
Temperature
|
Long term: -0ºC ~ 45ºC
Short term: -5ºC ~ 55ºC |
||
|
|
Relative Humidity
|
Long term: 5% ~ 85%
Short term: 5% ~ 95% |
||
|
Ethernet Feature
|
|
E-Line and E-LAN, QinQ
MPLS-TP based VPWS and VPLS Multi-section pseudo-wire (MS-PW) ETH PWE3, TDM PWE3, ATM/IMA PWE3 IGMP Snooping V2 Blacklist, Broadcast packet suppression, ACL VLAN SWAP |
||
|
PCM Feature
|
|
Voice or data Conference/Meeting,P2MP,MP2MP
FXO/FXS mode can be set by software E&M Interface voltage can be set by software (-48V/-12V) E&M signaling can be set by software (Bell types I, II, III, IV, V and British Telecom SSDC5) |
||
|
QoS
|
|
Hierarchical QoS scheduling and traffic shaping
DiffServ mode based on traffic classification, eight priority queues Simple traffic classification, complex traffic classification, per hop behavior (PHB),and ACL Committed access rate (CAR), shaping based on port scheduling priority PQ scheduling priority, weighted fair queuing (WFQ) and PQ+WFQ queuing Tail drop and weighted random early detection (WRED) |
||
|
OAM
|
MPLS-TP OAM
|
LSP/PW OAM:
CC, LB, LT AIS, RDI LM, DM LCK, TST CSF |
||
|
|
MPLS OAM
|
LSP/PW OAM: FDI, BDI, CV, FFD, TraceRoute, Ping, LM, DM
PW OAM: CES PW VCCV |
||
|
|
Ethernet OAM
|
ETH-CC, ETH-Loopback, ETH-Link Trace, Remote Loopback, Remote Fault Detection, RMON(RFC 2819)
|
||
|
Protection
|
Equipment-level protection
|
Universal Cross-Connect, System Control and Clock Processing Board 1+1 backup and power 1+1 backup
|
||
|
|
MPLS-TP-based service protection
|
LSP/PW Linear protection, Ring protection
Anti multifailure protection based on MS-PW LAG, MC-LAG, Dual-homing protection, LPT |
||
|
|
SDH based Service Protection
|
2/4 fiber MS-SP Ring;
1+1/1:n (n<=14) Linear MSP SNCP/SNCTP Tributary protection for E1/T1, E3/T3, E4, STM-1(e) and FE |
||
|
|
ASON
|
Distributed restorable rerouting protection
5-level service dedicated protection scheme based on different SLA: Diamond, Gold, Silver, Copper and Iron services Based on VC-4 and VC-12 granularity |
||
|
Synchronization
|
|
Both Ethernet and SDH networks supporting clock synchronization
Supporting G.813, Synchronous Ethernet and IEEE 1588v2 synchronization Adaptive clock recovery (ACR) Two external clock inputs/outputs (2 MHz or 2 Mbit/s) Two external time signals (1pps+TOD) |
||
Contact Us
Yantai Boxin International Trade Co., Ltd.
Click the number to chat on WhatsApp or send an email. WeChat ID is the same as the phone number.