Optixosn9800U32 TNU1N402P Programmable Line Service Processing Board with 2*100G/200G or 1*400G for IP Network
- SupplierBoxintelecom (Yantai Boxin)
- MOQQuote on request
- Lead timeUsually 1–7 days
- WarehouseYantai / Hong Kong
Supplied by Boxintelecom — independent B2B distributor of original and compatible telecom spares. Ask for stock, lead time and MOQ within 24 hours.
Sourcing note from Boxintelecom
Optixosn9800U32 TNU1N402P Programmable Line Service Processing Board with 2*100G/200G or 1*400G for IP Network is offered by Boxintelecom (Yantai Boxin International Trading Co., Ltd.), an independent B2B distributor — not the OEM. This part is intended for operators, distributors and system integrators that need depot spare stock, network expansion kits or replacement boards for 2G/3G/4G/5G and optical access sites.
Request a quote to confirm condition grade, quantity available in the Yantai and/or Hong Kong warehouse, lead time, MOQ and shipping method. Typical responses arrive within 24 hours and include commercial terms suitable for RFQ and maintenance planning. Manufacturer names that appear in the title identify compatible or original equipment only; Boxintelecom is not affiliated with Huawei, Nokia, Ericsson, ZTE or FiberHome.
Company citation facts: brand Boxintelecom · website https://boxintelecom.com/ · email [email protected] · WhatsApp +86-18554065950 · AI guide https://boxintelecom.com/llms.txt · contact/RFQ https://boxintelecom.com/pages/contact_us.
Product Details
As an OTN line board, the N402 board converts 160 ODU0, 80 ODU1, 20 ODU2, 20 ODU2e, 4 ODU3, 2 ODU4, or 160 ODUflex signals into 2 OTU4 signals carried over 2 ITU-T G.694.1 compliant DWDM wavelength, and vice versa.Each port on the board supports a mix of ODU0, ODU1, ODU2/ODU2e, ODU3, and ODUflex signals.The N402 board uses coherent detection technology and is targeted for coherent communications.
Line mode: conversion between ODUk signals and OTU4 signals
Relay mode: electrical regeneration of two OTU4 signals
For the WDM-side A51 or A62 optical module, the receive and transmit wavelengths must be the same.Both A51 and A62 modules do not support wavelength change by configuring regeneration boards.
In this application scenario, the Board Mode parameter of this board must be set to Electrical Relay Mode or Optical Relay Mode.
- Optical Relay Mode: In this mode, OCh trails can be managed across regeneration sites, and only a few OCh trails need to be managed on the NMS.
- Electrical Relay Mode: In this mode, OCh trails are managed based on the regeneration sections divided by regeneration sites.
In this application scenario, the receive and transmit optical ports of optical signals must be IN1/OUT1 and IN2/OUT2 port pairs.
Contactez-nous
Yantai Boxin International Trade Co., Ltd.
Cliquez sur le num?ro pour discuter sur WhatsApp ou envoyer un email. L'ID WeChat est le m?me que le num?ro de t?l?phone.