(1).png?w=2643&h=1585){kind=logo}
FTTH Optical Transmission System 5G Network Model 8xE1 Optical Processing Board SSN1PFL1 for OSN3500 Fiber Optic Equipment
$1,519.00 USD
A szállítási költség fizetéskor kerül kiszámításra
Mennyiség
Products Description
Description
OSN3500 8xE1 optical processing board, PFL1
The PFL1 is available in one functional version, N1.
The PFL1 can be installed in slots 1-8 and slots 11-16.
Processes E1 optical signals and overheads, and supports alarms, performance events, and maintenance features.
Consists of the client-side receive/transmit module, mapping/demapping module, interface converting module, logic and control module, clock module, and power module.
The PFL1 as a PDH processing board, which can be used on the OptiX OSN equipment series to receive/transmit and process 8xE1 optical signals.
The PFL1 is available in one functional version, N1.
The PFL1 can be installed in slots 1-8 and slots 11-16.
Processes E1 optical signals and overheads, and supports alarms, performance events, and maintenance features.
Consists of the client-side receive/transmit module, mapping/demapping module, interface converting module, logic and control module, clock module, and power module.
The PFL1 as a PDH processing board, which can be used on the OptiX OSN equipment series to receive/transmit and process 8xE1 optical signals.
|
Parameter
|
Value
|
|
|
Basic functions
|
PFL1 can Process 8xE1 optical signals.
|
|
|
Service processing
|
Receives/Transmits and processes 8 x E1 optical signals.
|
|
|
|
Supports transparent transmission in compliance with IEEE C37.94 to meet the transmission requirements of relay protection
equipment in the electric power industry. |
|
|
Optical port specifications
|
Supports I-2M optical ports, which comply with standards defined by Huawei.
|
|
|
Optical module specifications
|
Supports the detection and query of information about an optical module.
|
|
|
|
Allows setting the on/off state of a laser and supports the automatic laser shutdown (ALS) function.
|
|
|
|
Supports the usage and monitoring of eSFP optical modules, facilitating optical module maintenance.
|
|
|
Overhead processing
|
Processes path overheads at the VC-12 level, such as J2 bytes.
|
|
|
Alarms and performance events
|
Provides various alarms and performance events, facilitating equipment management and maintenance.
|
|
|
Maintenance features
|
Supports inloops and outloops at optical ports.
|
|
|
|
Supports warm resets and cold resets.Warm resets do not affect ongoing services.
|
|
|
|
Supports the query of board manufacturer information.
|
|
|
|
Supports in-service FPGA loading.
|
|
|
|
Supports board software upgrades without affecting ongoing services.
|
|
|
|
Supports the PRBS function.
|
|
|
|
Hot board swapping.
|
|
|
Protection scheme
|
TPS protection is not supported.
|
|
|
Parameters of the E1 optical interfaces of the OptiX OSN equipment
|
|
|
|
Nominal bit rate
|
2048 kbit/s
|
|
|
Code type
|
NRZ
|
|
|
Type of optical interface
|
I-2M
|
|
|
Transmission distance (km)
|
0 to 2
|
|
|
Operating wavelength range (nm)
|
Single-mode: 1260 to 1360
|
|
|
|
Multi-mode: 850
|
|
|
Type of fiber
|
Single-mode LC/Multi-mode LC
|
|
|
Launched optical power (dBm)
|
-15 to -8
|
|
|
Optical receiver sensitivity (dBm)
|
-23
|
|
|
Minimum overload (dBm)
|
-8
|
|
|
Minimum extinction ratio (dB)
|
8.2
|
|
