OSN1800V 4-Port 10G Fiber Optic Branch SPU Processing Board Transmission Equipment 5G Tributary Service Model 03030TMG TNF5TQX

Specifications

Basic functions

Working modes of TQX boards and their ports

TQX boards support the following port working modes:

1. ODU2 non-convergence mode:
a.4 x STM-64/OC-192/10GE LAN/10GE WAN/FC800/FICON 8G/OTU2<->4 x ODU2
b.4 x 10GE LAN/FC1200/FICON 10G/OTU2e<->4 x ODU2e

2.ODUflex non-convergence mode: 4 x FC800/10GE LAN<->4 x ODUflex

NOTE:
TQX boards do not support the setting of the board working mode.
Each FC800 service uses seven timeslots of an ODUflex.The timeslot number of an ODUflex for each 10GE LAN service needs to be
manually calculated based on its service rate.

Cross-connect functionality

Supports cross-connection for four channels of ODU2, ODU2e, or ODUflex signals through a cross-connect board and the bus on the
backplane.

Maximum frame length (MFL) for a port

The value ranges from 1518 to 9600 (bytes).

NOTE:
TQX boards provide the maximum frame length (MFL) for a port function only when receiving 10GE LAN services on the client side.
When Port Mapping is set to Bit Transparent Mapping(11.1G), Maximum Frame Length is unavailable on the NMS.

Client-Side Pluggable Optical Module

XFP-10G-850nm-MMF-0.3km
XFP-10G-1310nm-SMF-10km
XFP-10G-1550nm-SMF-40km
XFP-10G-1550nm-SMF-80km
XFP-10G-TX1270/RX1330nm(BIDI)-SMF-10km
XFP-10G-TX1330/RX1270nm(BIDI)-SMF-10km
XFP-10G-TX1270/RX1330nm(BIDI)-SMF-40km
XFP-10G-TX1330/RX1270nm(BIDI)-SMF-40km
XFP-8.5G/10G-1310nm-10km-SM
SFP+ -10G-(1471nm to 1611nm)(CWDM)-SMF-70km

Version description of the TQX board

Board

Product Applicable-System Control Board-Initial Board Version Supported by System Control Board

TQX

1800V-TNF5UXCM/TNF5XCH-V100R005C00
1800V-TNF5UXCME-V100R005C20