GPON OLT Board Classes Explained: C+ vs C++ vs C+++ and GPHF vs GPUF vs GPLF vs GPSF
Short answer: two separate choices get mixed up here. The power class (B+, C+, C++, C+++) decides how much optical loss your PON can absorb, and the page's part-number table tags the modules at 3–5 dB (C+), 5–7 dB (C++) and 7 dB (C+++) over 20 km [S3]. The board model (GPHF, GPUF, GPLF, GPSF) decides which features you get — HQoS, D-CCAP, dual Type B/C protection and PON ISSU are not available on every board, even though all four carry 16 ports, a 1:128 split ratio and a 40 km maximum distance difference [S1]. Buy the power class for the fiber plant, and the board model for the services.
Everything below comes from the Boxintelecom product pages. Figures the pages do not publish are marked as not stated rather than estimated.
1. The power class: what the part-number table actually says
The QSFP28-100G-LR4 product page carries a PON module reference table that lists the OLT-side optical parts with their distance and dB tags [S3]:
| Part number | Description as listed | Distance | Wavelength / rate |
|---|---|---|---|
| GPON-OLT-C+ | GPON OLT C+, 3–5 dB | 20 km | Tx 2.488 Gbps 1490 nm / Rx 1.244 Gbps 1310 nm, SC/UPC |
| GPON-OLT-C++ | GPON OLT C++, 5–7 dB | 20 km | Tx 2.488 Gbps 1490 nm / Rx 1.244 Gbps 1310 nm, SC/UPC |
| GPON-OLT-C+++ | GPON OLT C+++, 7 dB | 20 km | Tx 2.488 Gbps 1490 nm / Rx 1.244 Gbps 1310 nm, SC/UPC |
| EPON-OLT-PX20+ | EPON OLT PX20+, 3–5 dB | 20 km | Tx 1490 nm / Rx 1310 nm, 1.25 G, SC/UPC |
| EPON-OLT-PX20++ | EPON OLT PX20++, 5–7 dB | 20 km | Tx 1490 nm / Rx 1310 nm, 1.25 G, SC/UPC |
| EPON-OLT-PX20+++ | EPON OLT PX20+++, 7 dB | 20 km | Tx 1490 nm / Rx 1310 nm, 1.25 G, SC/UPC |
The XGS-PON combo module page gives the same story in dBm instead of class names. On the CSHF board, the C+ module's minimum output optical power is listed as 3 dBm on the GPON channel and 5 dBm on the XGS-PON channel; the B+ module is listed at 1.5 dBm (GPON) and 1 dBm (XGS-PON). Maximum output optical power is 7 dBm (GPON) and 8 dBm (XGS-PON) for C+, with the B+ maximum not stated in the extracted table [S2].
1.1 How to choose between C+ and C+++
- C+ (3–5 dB) is the default for FTTH inside a town where the splitter is close to the OLT and the drop cable runs are short.
- C++ (5–7 dB) buys roughly two more dB of headroom for the same 20 km — useful when the splitter is in a street cabinet rather than the exchange.
- C+++ (7 dB) is the highest class on the page's list and is used when the loss budget is the binding constraint.
Two limits stay the same across all three classes on that table: 20 km and the same 1490/1310 nm pair [S3]. Raising the class does not extend the published distance — it changes the loss you can afford inside that distance. If your reach problem is kilometers rather than dB, a higher class will not solve it; look at the board's 40 km maximum distance difference instead [S1].
1.2 The split ratio is a board property, not a module property
The GPLF board page lists a maximum splitting ratio of 1:128, a maximum of 128 ONUs per port, 1024 T-CONTs per port, 3872 GEM ports per port and 16,384 GEM ports per board, with 16,368 service streams per board and 1,238,784 kbit/s of bandwidth per port [S1]. Those figures hold for the whole board family.
The arithmetic that trips people up: 16 ports x 128 ONUs = 2,048 subscribers on one board, all sharing the same backplane and the same single-fiber PON trees. Whether the fiber plant can actually support 1:128 at your distances is a link-budget question the page does not answer — the page gives the board's rating, not a per-splitter loss table.
2. The board model: four boards, four different feature sets
The GPLF page compares four MA5800-compatible service boards side by side — H901GPHF/H902GPHF, H901GPUF/H902GPUF, H901GPLF/H902GPLF and H901GPSF/H902GPSF [S1]. What is identical:
| Item | Value (all four boards) |
|---|---|
| Interfaces | 16 |
| Forwarding performance | 40 Gbit/s |
| Port rate | Upstream 1.224 Gbit/s, downstream 2.488 Gbit/s |
| Maximum splitting ratio | 1:128 |
| Maximum distance difference | 40 km |
| Bandwidth per port | 1,238,784 kbit/s |
| T-CONT per port | 1024 |
| Maximum ONUs per port | 128 |
| GEM ports per board / per port | 16,384 / 3,872 |
| Maximum service streams per board | 16,368 |
| Downstream FEC, upstream FEC | Supported |
| Anti-DOS, anti-MAC/IP spoofing | Supported |
| 1588V3, NTP | Supported |
| GPON Type B / Type C protection (single) | Supported |
What differs is where the money and the design risk sit [S1]:
| Feature | GPHF | GPUF | GPLF | GPSF |
|---|---|---|---|---|
| Application listed | FTTC/B/D, D-CCAP, FTTH, FTTO/FTTM | FTTC/B/D, D-CCAP, FTTH, FTTO/FTTM | FTTC/B/D, D-CCAP, FTTH, FTTO/FTTM | FTTH only |
| MAC addresses | 131,072 | 32,768 | 32,768 | 16,384 |
| Routers / ARP | 196,608 | 196,608 | 196,608 | 65,536 |
| Energy saving | Yes | Yes | No | Yes |
| 9K jumbo frame | Yes | No | Yes | No |
| HQoS | Yes | No | No | No |
| Y.1731 PM | Yes | Yes | Yes | No |
| PON ISSU | Yes | No | No | Yes |
| D-CCAP | Yes | No | No | No |
| GPON Type B protection (dual) | Yes | No | No | No |
| GPON Type C protection (dual) | Yes | No | No | No |
2.1 Read the table as four different jobs
- GPHF is the only board on the page with HQoS, D-CCAP and dual Type B/Type C protection, plus the largest MAC table at 131,072 [S1]. That is the board for a head-end that must survive a fiber cut with dual-homing protection and must shape per-subscriber traffic.
- GPUF drops HQoS, jumbo frames, ISSU and dual protection but keeps energy saving and full 1:128 splitting [S1]. It is a straight capacity board.
- GPLF is the only board of the four with no energy-saving tick, yet it keeps 9K jumbo frames and full Y.1731 PM [S1]. If your acceptance test includes performance monitoring per service, GPLF covers it; if efficiency targets are contractual, note that missing tick.
- GPSF is FTTH-only, has the smallest MAC table (16,384) and the smallest ARP table (65,536), and is the only board without Y.1731 PM — but it does carry PON ISSU [S1]. It is the narrowest of the four in features and the cheapest in scope.
2.2 The XGS-PON combo variant
If the requirement is 10G PON coexistence rather than pure GPON, the CSHF board is the one documented on its own page: 16 ports, SFP+ package, GPON channel Tx 1490 nm / Rx 1310 nm at 2.488 / 1.244 Gbit/s, XGS-PON channel Tx 1577 nm / Rx 1270 nm at 9.953 / 9.953 or 2.488 Gbit/s, with C+ and B+ module options [S2]. A second listing for the H902CSHF describes it as a 16-port XGS-PON OLT interface board for the MA5800 [S4].
The important procurement note: the CSHF page describes one-fiber bidirectional modules, so the same fiber carries both the GPON and the XGS-PON channel [S2]. That is what makes GPON-to-XGS-PON migration a board swap instead of a re-cabling project.
3. A sizing sequence that avoids rework
- Fix the splitter plan first. 1:128 is the board maximum [S1], but the number you actually deploy is set by your loss budget.
- Pick the power class from the plant, not the price list. 3–5 dB (C+), 5–7 dB (C++), 7 dB (C+++) — all rated over 20 km on the reference table [S3].
- Pick the board model from the service list. Protection, HQoS, D-CCAP, Y.1731 PM, ISSU are per-board switches, not chassis features [S1].
- Confirm the OLT chassis accepts the board. The GPLF page scopes these boards to MA5800 series (MA5800-X2, MA5800-X7) [S1]; the CSHF page scopes to MA5800 as well [S2].
- Check the ONU side before ordering thousands of ONTs. The board's per-port ONU ceiling is 128 [S1]; ONT models and port mixes are a separate decision.
- Write down what is not published. Per-splitter insertion loss, link-budget margin at each split level, and full optical spectrum data are not on these pages. Ask for them with the RFQ.
4. Recommendation
- Town FTTH, no protection requirement, cost-sensitive: GPON C+ modules on GPUF boards, 1:64 or 1:128 depending on distance.
- Metro FTTH with SLA and per-user shaping: C++ modules on GPHF boards — it is the only board with HQoS and dual Type B/C protection [S1].
- Acceptance testing includes Y.1731 PM but no D-CCAP: GPLF is the fit; just accept the missing energy-saving tick [S1].
- Moving to 10G PON: CSHF XGS-PON combo board with C+ or B+ modules [S2].
- Never assume a class upgrade extends reach: all listed classes are tagged at the same 20 km [S3].
5. Where to buy
- GPON Class C service board GPLF for MA5800 series (MA5800-X2 / MA5800-X7): https://boxintelecom.com/products/gpon-class-c-service-board-gplf-for-ma5800-series-ma5800x2-ma5800x7
- CSHF 16-port XGS-PON C+ combo OLT interface board (MA5800): https://boxintelecom.com/products/h901cshf-ma5800-x2-cshf-16-port-xgs-pon-c-module-gpon-combo-olt-interface-board
- H902CSHF 16-port XGS-PON OLT interface board: https://boxintelecom.com/products/brand-new-i-h902cshf-16-port-xgs-pon-olt-interface-board-ma5800-olt-10g-gigabit-business-board-cshf
- MA5800-X7 chassis with GPLF/GPUF/GPHF boards: https://boxintelecom.com/products/gepon-olt-ma5800-x7-10ge-olt-with-gplf-gpuf-gphf-c-c-service-board-gpon-epon
- MA5800-X2 mini OLT with 8/16-port GPON board: https://boxintelecom.com/products/ma5800x2-terminal-hw-mini-olt-ma5800x2-olt-gpon-with-8-16-ports-gpon-board
Send the splitter plan and the required board model together; the quote depends on both.
Sources
- [S1] GPON Class C service board GPLF comparison table (GPHF / GPUF / GPLF / GPSF) — https://boxintelecom.com/products/gpon-class-c-service-board-gplf-for-ma5800-series-ma5800x2-ma5800x7
- [S2] CSHF 16-port XGS-PON C+ combo module specification — https://boxintelecom.com/products/h901cshf-ma5800-x2-cshf-16-port-xgs-pon-c-module-gpon-combo-olt-interface-board
- [S3] PON module part-number and dB reference table — https://boxintelecom.com/products/qsfp28-100g-lr4-qsfp28-100gbase-lr4-1310nm-10km-dom-duplex-lc-upc-smf-optical-transceiver-module
- [S4] H902CSHF XGS-PON OLT interface board listing — https://boxintelecom.com/products/brand-new-i-h902cshf-16-port-xgs-pon-olt-interface-board-ma5800-olt-10g-gigabit-business-board-cshf
Product pages do not publish prices; this store quotes on request.
Publisher notes (not for publication)
Internal links to add in the body: - → https://boxintelecom.com/collections/optical-module (anchor: "PON and 100G optical modules") - → /posts/01-zte-olt-chassis-ma5680t-ma5683t-ma5608t(发布后按最终路径替换) (anchor: "which OLT chassis holds these boards") - → https://boxintelecom.com/collections/olt-onu-ont-wifi-router (anchor: "OLT and ONT hardware")
Keyword density check: "GPON OLT" 4x, "C+" family (C+/C++/C+++) 19 distinct occurrences in 1,527 words ≈ 1.2%. Board model codes (GPHF/GPUF/GPLF/GPSF) appear only inside the comparison table and its explanation.
Suggested images: 1. Photo of the GPLF board with 16 SFP cages numbered — caption "16 ports, 1:128 split, 40 km maximum distance difference". 2. Simple loss-budget diagram: OLT module → splitter → ONT with the 3–5 / 5–7 / 7 dB bands drawn at the module end — caption must cite S3 for the dB values. 3. Table screenshot of the four-board feature matrix (HQoS / ISSU / D-CCAP / dual protection) — caption "four feature switches that decide the board, not the chassis".
GPON OLT Board Classes Explained: C+ vs C++ vs C+++ and GPHF vs GPUF vs GPLF vs GPSF
Short answer: two separate choices get mixed up here. The power class (B+, C+, C++, C+++) decides how much optical loss your PON can absorb, and the page's part-number table tags the modules at 3–5 dB (C+), 5–7 dB (C++) and 7 dB (C+++) over 20 km [S3]. The board model (GPHF, GPUF, GPLF, GPSF) decides which features you get — HQoS, D-CCAP, dual Type B/C protection and PON ISSU are not available on every board, even though all four carry 16 ports, a 1:128 split ratio and a 40 km maximum distance difference [S1]. Buy the power class for the fiber plant, and the board model for the services.
Everything below comes from the Boxintelecom product pages. Figures the pages do not publish are marked as not stated rather than estimated.
1. The power class: what the part-number table actually says
The QSFP28-100G-LR4 product page carries a PON module reference table that lists the OLT-side optical parts with their distance and dB tags [S3]:
| Part number | Description as listed | Distance | Wavelength / rate |
|---|---|---|---|
| GPON-OLT-C+ | GPON OLT C+, 3–5 dB | 20 km | Tx 2.488 Gbps 1490 nm / Rx 1.244 Gbps 1310 nm, SC/UPC |
| GPON-OLT-C++ | GPON OLT C++, 5–7 dB | 20 km | Tx 2.488 Gbps 1490 nm / Rx 1.244 Gbps 1310 nm, SC/UPC |
| GPON-OLT-C+++ | GPON OLT C+++, 7 dB | 20 km | Tx 2.488 Gbps 1490 nm / Rx 1.244 Gbps 1310 nm, SC/UPC |
| EPON-OLT-PX20+ | EPON OLT PX20+, 3–5 dB | 20 km | Tx 1490 nm / Rx 1310 nm, 1.25 G, SC/UPC |
| EPON-OLT-PX20++ | EPON OLT PX20++, 5–7 dB | 20 km | Tx 1490 nm / Rx 1310 nm, 1.25 G, SC/UPC |
| EPON-OLT-PX20+++ | EPON OLT PX20+++, 7 dB | 20 km | Tx 1490 nm / Rx 1310 nm, 1.25 G, SC/UPC |
The XGS-PON combo module page gives the same story in dBm instead of class names. On the CSHF board, the C+ module's minimum output optical power is listed as 3 dBm on the GPON channel and 5 dBm on the XGS-PON channel; the B+ module is listed at 1.5 dBm (GPON) and 1 dBm (XGS-PON). Maximum output optical power is 7 dBm (GPON) and 8 dBm (XGS-PON) for C+, with the B+ maximum not stated in the extracted table [S2].
1.1 How to choose between C+ and C+++
- C+ (3–5 dB) is the default for FTTH inside a town where the splitter is close to the OLT and the drop cable runs are short.
- C++ (5–7 dB) buys roughly two more dB of headroom for the same 20 km — useful when the splitter is in a street cabinet rather than the exchange.
- C+++ (7 dB) is the highest class on the page's list and is used when the loss budget is the binding constraint.
Two limits stay the same across all three classes on that table: 20 km and the same 1490/1310 nm pair [S3]. Raising the class does not extend the published distance — it changes the loss you can afford inside that distance. If your reach problem is kilometers rather than dB, a higher class will not solve it; look at the board's 40 km maximum distance difference instead [S1].
1.2 The split ratio is a board property, not a module property
The GPLF board page lists a maximum splitting ratio of 1:128, a maximum of 128 ONUs per port, 1024 T-CONTs per port, 3872 GEM ports per port and 16,384 GEM ports per board, with 16,368 service streams per board and 1,238,784 kbit/s of bandwidth per port [S1]. Those figures hold for the whole board family.
The arithmetic that trips people up: 16 ports x 128 ONUs = 2,048 subscribers on one board, all sharing the same backplane and the same single-fiber PON trees. Whether the fiber plant can actually support 1:128 at your distances is a link-budget question the page does not answer — the page gives the board's rating, not a per-splitter loss table.
2. The board model: four boards, four different feature sets
The GPLF page compares four MA5800-compatible service boards side by side — H901GPHF/H902GPHF, H901GPUF/H902GPUF, H901GPLF/H902GPLF and H901GPSF/H902GPSF [S1]. What is identical:
| Item | Value (all four boards) |
|---|---|
| Interfaces | 16 |
| Forwarding performance | 40 Gbit/s |
| Port rate | Upstream 1.224 Gbit/s, downstream 2.488 Gbit/s |
| Maximum splitting ratio | 1:128 |
| Maximum distance difference | 40 km |
| Bandwidth per port | 1,238,784 kbit/s |
| T-CONT per port | 1024 |
| Maximum ONUs per port | 128 |
| GEM ports per board / per port | 16,384 / 3,872 |
| Maximum service streams per board | 16,368 |
| Downstream FEC, upstream FEC | Supported |
| Anti-DOS, anti-MAC/IP spoofing | Supported |
| 1588V3, NTP | Supported |
| GPON Type B / Type C protection (single) | Supported |
What differs is where the money and the design risk sit [S1]:
| Feature | GPHF | GPUF | GPLF | GPSF |
|---|---|---|---|---|
| Application listed | FTTC/B/D, D-CCAP, FTTH, FTTO/FTTM | FTTC/B/D, D-CCAP, FTTH, FTTO/FTTM | FTTC/B/D, D-CCAP, FTTH, FTTO/FTTM | FTTH only |
| MAC addresses | 131,072 | 32,768 | 32,768 | 16,384 |
| Routers / ARP | 196,608 | 196,608 | 196,608 | 65,536 |
| Energy saving | Yes | Yes | No | Yes |
| 9K jumbo frame | Yes | No | Yes | No |
| HQoS | Yes | No | No | No |
| Y.1731 PM | Yes | Yes | Yes | No |
| PON ISSU | Yes | No | No | Yes |
| D-CCAP | Yes | No | No | No |
| GPON Type B protection (dual) | Yes | No | No | No |
| GPON Type C protection (dual) | Yes | No | No | No |
2.1 Read the table as four different jobs
- GPHF is the only board on the page with HQoS, D-CCAP and dual Type B/Type C protection, plus the largest MAC table at 131,072 [S1]. That is the board for a head-end that must survive a fiber cut with dual-homing protection and must shape per-subscriber traffic.
- GPUF drops HQoS, jumbo frames, ISSU and dual protection but keeps energy saving and full 1:128 splitting [S1]. It is a straight capacity board.
- GPLF is the only board of the four with no energy-saving tick, yet it keeps 9K jumbo frames and full Y.1731 PM [S1]. If your acceptance test includes performance monitoring per service, GPLF covers it; if efficiency targets are contractual, note that missing tick.
- GPSF is FTTH-only, has the smallest MAC table (16,384) and the smallest ARP table (65,536), and is the only board without Y.1731 PM — but it does carry PON ISSU [S1]. It is the narrowest of the four in features and the cheapest in scope.
2.2 The XGS-PON combo variant
If the requirement is 10G PON coexistence rather than pure GPON, the CSHF board is the one documented on its own page: 16 ports, SFP+ package, GPON channel Tx 1490 nm / Rx 1310 nm at 2.488 / 1.244 Gbit/s, XGS-PON channel Tx 1577 nm / Rx 1270 nm at 9.953 / 9.953 or 2.488 Gbit/s, with C+ and B+ module options [S2]. A second listing for the H902CSHF describes it as a 16-port XGS-PON OLT interface board for the MA5800 [S4].
The important procurement note: the CSHF page describes one-fiber bidirectional modules, so the same fiber carries both the GPON and the XGS-PON channel [S2]. That is what makes GPON-to-XGS-PON migration a board swap instead of a re-cabling project.
3. A sizing sequence that avoids rework
- Fix the splitter plan first. 1:128 is the board maximum [S1], but the number you actually deploy is set by your loss budget.
- Pick the power class from the plant, not the price list. 3–5 dB (C+), 5–7 dB (C++), 7 dB (C+++) — all rated over 20 km on the reference table [S3].
- Pick the board model from the service list. Protection, HQoS, D-CCAP, Y.1731 PM, ISSU are per-board switches, not chassis features [S1].
- Confirm the OLT chassis accepts the board. The GPLF page scopes these boards to MA5800 series (MA5800-X2, MA5800-X7) [S1]; the CSHF page scopes to MA5800 as well [S2].
- Check the ONU side before ordering thousands of ONTs. The board's per-port ONU ceiling is 128 [S1]; ONT models and port mixes are a separate decision.
- Write down what is not published. Per-splitter insertion loss, link-budget margin at each split level, and full optical spectrum data are not on these pages. Ask for them with the RFQ.
4. Recommendation
- Town FTTH, no protection requirement, cost-sensitive: GPON C+ modules on GPUF boards, 1:64 or 1:128 depending on distance.
- Metro FTTH with SLA and per-user shaping: C++ modules on GPHF boards — it is the only board with HQoS and dual Type B/C protection [S1].
- Acceptance testing includes Y.1731 PM but no D-CCAP: GPLF is the fit; just accept the missing energy-saving tick [S1].
- Moving to 10G PON: CSHF XGS-PON combo board with C+ or B+ modules [S2].
- Never assume a class upgrade extends reach: all listed classes are tagged at the same 20 km [S3].
5. Where to buy
- GPON Class C service board GPLF for MA5800 series (MA5800-X2 / MA5800-X7): https://boxintelecom.com/products/gpon-class-c-service-board-gplf-for-ma5800-series-ma5800x2-ma5800x7
- CSHF 16-port XGS-PON C+ combo OLT interface board (MA5800): https://boxintelecom.com/products/h901cshf-ma5800-x2-cshf-16-port-xgs-pon-c-module-gpon-combo-olt-interface-board
- H902CSHF 16-port XGS-PON OLT interface board: https://boxintelecom.com/products/brand-new-i-h902cshf-16-port-xgs-pon-olt-interface-board-ma5800-olt-10g-gigabit-business-board-cshf
- MA5800-X7 chassis with GPLF/GPUF/GPHF boards: https://boxintelecom.com/products/gepon-olt-ma5800-x7-10ge-olt-with-gplf-gpuf-gphf-c-c-service-board-gpon-epon
- MA5800-X2 mini OLT with 8/16-port GPON board: https://boxintelecom.com/products/ma5800x2-terminal-hw-mini-olt-ma5800x2-olt-gpon-with-8-16-ports-gpon-board
Send the splitter plan and the required board model together; the quote depends on both.
Sources
- [S1] GPON Class C service board GPLF comparison table (GPHF / GPUF / GPLF / GPSF) — https://boxintelecom.com/products/gpon-class-c-service-board-gplf-for-ma5800-series-ma5800x2-ma5800x7
- [S2] CSHF 16-port XGS-PON C+ combo module specification — https://boxintelecom.com/products/h901cshf-ma5800-x2-cshf-16-port-xgs-pon-c-module-gpon-combo-olt-interface-board
- [S3] PON module part-number and dB reference table — https://boxintelecom.com/products/qsfp28-100g-lr4-qsfp28-100gbase-lr4-1310nm-10km-dom-duplex-lc-upc-smf-optical-transceiver-module
- [S4] H902CSHF XGS-PON OLT interface board listing — https://boxintelecom.com/products/brand-new-i-h902cshf-16-port-xgs-pon-olt-interface-board-ma5800-olt-10g-gigabit-business-board-cshf
Product pages do not publish prices; this store quotes on request.
Publisher notes (not for publication)
Internal links to add in the body: - → https://boxintelecom.com/collections/optical-module (anchor: "PON and 100G optical modules") - → /posts/01-zte-olt-chassis-ma5680t-ma5683t-ma5608t(发布后按最终路径替换) (anchor: "which OLT chassis holds these boards") - → https://boxintelecom.com/collections/olt-onu-ont-wifi-router (anchor: "OLT and ONT hardware")
Keyword density check: "GPON OLT" 4x, "C+" family (C+/C++/C+++) 19 distinct occurrences in 1,527 words ≈ 1.2%. Board model codes (GPHF/GPUF/GPLF/GPSF) appear only inside the comparison table and its explanation.
Suggested images: 1. Photo of the GPLF board with 16 SFP cages numbered — caption "16 ports, 1:128 split, 40 km maximum distance difference". 2. Simple loss-budget diagram: OLT module → splitter → ONT with the 3–5 / 5–7 / 7 dB bands drawn at the module end — caption must cite S3 for the dB values. 3. Table screenshot of the four-board feature matrix (HQoS / ISSU / D-CCAP / dual protection) — caption "four feature switches that decide the board, not the chassis".