B2B Telecom Equipment Supplier — Request a Quote Todayتأمین‌کننده B2B تجهیزات مخابراتی — امروز درخواست قیمت کنید
B2B Telecom Equipment Supplier — Request a Quote Todayتأمین‌کننده B2B تجهیزات مخابراتی — امروز درخواست قیمت کنید
2G/3G/4G/5G Network Equipment — Nokia, Ericsson, Huawei, ZTE & Moreتجهیزات شبکه 2G/3G/4G/5G — Nokia، Ericsson، Huawei، ZTE و بیشتر
2G/3G/4G/5G Network Equipment — Nokia, Ericsson, Huawei, ZTE & Moreتجهیزات شبکه 2G/3G/4G/5G — Nokia، Ericsson، Huawei، ZTE و بیشتر
Worldwide Shipping
Sea freight, land transport, air freight

NE8000 M1C Fixed-Port SKUs: 4×10GE+12GE vs 6×10GE+22GE vs 16×10GE+12GE NE8000 M1C Fixed-Port SKUs: 4×10GE+12GE vs 6×10GE+22GE vs 16×10GE+12GE

Nov 14, 2026

NE8000 M1C Fixed-Port SKUs: 4×10GE+12GE vs 6×10GE+22GE vs 16×10GE+12GE

Short answer: the NetEngine 8000 M1C is a fixed-configuration 1U router, and the product page lists six ordering codes built from three port layouts and two power options. The port layouts are 4×10GE + 12×GE, 6×10GE + 22×GE and 16×10GE + 12×GE. Each layout is offered with 2×DC or 2×AC power, and every listed configuration is marked “without Software and Document.” Choose the layout by the number of 10GE links you need to terminate, then choose DC or AC to match the site feed.

All figures below come from the NetEngine 8000 M1C product page. Where the page is silent, this article says “not stated on page” instead of filling the gap.

What the page confirms about the M1C

The overview describes a 1U chassis with a 220 mm depth and “up to 172G port capacity.” The feature block repeats the 1U, 220 mm and 172 Gbps figures and adds “Max 16*10GE / GE.” The same block lists SRv6 and EVPN, a programmable network processor, Telemetry, and 1588v2 high-precision clock support.

The comparison table later on the page adds the following M1C values:

  • Switching capacity: 344 Gbit/s
  • Forwarding performance: 72 Mpps
  • Capacity density: 172 G/U
  • Power modules: 2, 1+1
  • Fans: 2 (integrated)
  • Dimensions: 44.45 × 442 × 220 mm (1 U)
  • Typical power consumption: 89.21 W
  • Weight in full configuration: 3.9 kg

Read the 172G and 344 Gbit/s figures as different published metrics, not as a contradiction. The overview and feature text use 172G for port capacity; the specification table uses 344 Gbit/s for switching capacity.

The page also describes the platform as a fixed-configuration router that “does not support flexible cards.” That row appears for the M1A, M1C and F1A columns in the comparison table. For a buyer, this is the key architectural statement on the page: the M1C is not a chassis you expand later with line cards. The port layout you order is the port layout you deploy.

The six ordering codes

The page publishes the following ordering information for the M1C. The descriptions below are taken from that table.

Ordering code Model Fixed interface Power Software and document
02354ARK CR8PM1CBASC0 4×10GE + 12×GE 2×DC Not included
02354ARL CR8PM1CBASC1 4×10GE + 12×GE 2×AC Not included
02354ARP CR8PM1CBASC2 6×10GE + 22×GE 2×DC Not included
02354ARQ CR8PM1CBASC3 6×10GE + 22×GE 2×AC Not included
02354ART CR8PM1CBASC4 16×10GE + 12×GE 2×DC Not included
02354ARU CR8PM1CBASC5 16×10GE + 12×GE 2×AC Not included

Two details in this table are easy to miss. One is the power count: it is always two, and the specification table describes the M1C power modules as “2, 1+1.” The other is the software note, which is part of every basic-configuration description. The page does not list a separate software SKU, license tier or document set, so treat “without Software and Document” as a line item to confirm in the quote rather than an assumption.

Reading the three port layouts

4×10GE + 12×GE

This layout gives 16 ports in total, with four at 10GE and twelve at GE. It fits a small aggregation point where the upstream is a pair of 10GE links and the downstream is a group of GE access or service ports. The page does not state how many of the twelve GE ports are optical versus electrical on this specific SKU; the overview only says the platform supports 10GE and GE service access over optical and electrical ports. Confirm the per-port media type before ordering optics.

6×10GE + 22×GE

This layout gives 28 ports in total: six at 10GE and twenty-two at GE. It carries the highest GE count of the three layouts, which makes it the layout to examine when the router is terminating many GE access links and only a handful of 10GE uplinks. The 10GE count is lower than the 16×10GE layout, so it is not a substitute for a design that needs sixteen 10GE ports.

16×10GE + 12×GE

This layout also gives 28 ports in total, but the balance changes to sixteen 10GE ports and twelve GE ports. It matches the page’s “Max 16*10GE / GE” statement and is the layout to look at when 10GE termination is the constraint and GE access is secondary. The trade-off is explicit in the table: you gain ten more 10GE ports than the 4×10GE layout, but you lose the larger GE pool of the 6×10GE layout.

The page does not list a 16×10GE + 22×GE combination. If a design needs both the maximum 10GE count and the maximum GE count, the published table does not offer that SKU.

DC or AC: what the page actually says

The ordering table gives two power variants for each port layout: 2×DC and 2×AC. The specification table adds “Power module: 2, 1+1” for the M1C. That is the full extent of the power information on this page. The page does not state the power-supply model numbers, the input voltage range, the wattage of each module, or whether a DC and an AC module can be mixed in the same chassis.

For a buyer, that means two questions belong in the quote request: which power module part number is fitted, and what input range it accepts. The 1+1 notation tells you the chassis is described with two power modules in a redundant arrangement; it does not tell you the feed voltage or the module rating.

M1C against the other platforms in the same table

The page’s specification table compares five platforms. The values below are copied from the M1C page, not from separate datasheets.

Parameter M1A M1C M1D-B F1A F8
Switching capacity 352 Gbit/s 344 Gbit/s 368 Gbps 2.4 Tbit/s 4 Tbps
Forwarding performance 72 Mpps 72 Mpps 276 Mpps 453 Mpps 906 Mpps
Capacity density 176 G/U 172 G/U 184 G/U 1200 G/U 492 G/U
Power modules 2, 1+1 (DC) 2, 1+1 2, 1+1 2, 1+1 DC up to 5+1; AC up to 3+3
Fans 3 (integrated) 2 (integrated) 3, 2+1 4, 3+1 1+1 up to 2+1
Dimensions (H × W × D) 44.45 × 442 × 220 mm 44.45 × 442 × 220 mm 44.5 × 442 × 220 mm 43.6 × 442 × 420 mm 575 × 442 × 482.8 mm
Typical power consumption 75 W 89.21 W 110 W (estimated) 350 W 1604 W (estimated)
Weight in full configuration 3.4 kg 3.9 kg 4.1 kg (estimated) 7.25 kg 120.5 kg (2T bundle)

The M1C and M1A are close on switching capacity and identical on forwarding performance, but the M1C is listed at 89.21 W against 75 W for the M1A, and 3.9 kg against 3.4 kg. The M1D-B moves to 368 Gbps and 276 Mpps in the same 1U footprint, with 3 fans in a 2+1 arrangement and a 110 W estimated draw. The F1A and F8 are different classes: 2.4 Tbit/s and 4 Tbps respectively, with the F8 occupying 13U and weighing 120.5 kg in the listed 2T bundle.

The table is an initial shortlist, not a per-model datasheet. The page does not publish interface media per port, routing scale, buffer size or noise for any of these columns.

What the page does not state

The following items are absent from the M1C page. They are listed here so they do not get invented in an internal design document:

  • Transceivers and optics: the ordering descriptions say “without Software and Document”; they do not list optics, and the page does not state which SFP or QSFP types are supported per port.
  • Per-port media type: the overview says 10GE and GE service access over optical and electrical ports, but the six-SKU table does not break each port down as optical or electrical.
  • Power module details: model number, wattage and input voltage range are not stated.
  • Routing and switching scale: MAC table size, VLAN count, route capacity and buffer size are not stated.
  • Environmental numbers: the feature text says “industrial wide temperature design,” but the M1C column of the specification table does not give a numeric operating-temperature range.
  • Noise and reliability: fan noise, MTBF and MTTR are not stated.
  • Warranty: the M1C page does not state a warranty period.
  • Software licensing: the page says the basic configuration is without software and document, but it does not describe license tiers or feature packs.
  • Rack accessories: rail kit, airflow direction and cable management are not stated.
  • End-of-life status: the page does not state an EoL or EoS date.

These are the points where a buyer can accidentally order the wrong configuration.

A quote checklist for the M1C

Before requesting a quote, put these six items in the request:

  1. Ordering code and model: for example, 02354ARQ / CR8PM1CBASC3 for 6×10GE + 22×GE with 2×AC power.
  2. Port media: confirm which 10GE and GE ports are optical and which are electrical on that exact SKU.
  3. Power: confirm the module part number and input range for the DC or AC variant you need.
  4. Software and documents: confirm what is included, since every listed basic configuration says “without Software and Document.”
  5. Optics: list the transceivers separately; they are not part of the basic configuration.
  6. Lead time and warranty: the NE8000 M1/M4 series page states a lead time of 5–20 days, but the M1C page itself does not state a warranty period.

If the requirement grows beyond a fixed 1U box, the NE8000 X8 and X4 listings sit in a different class, and flexible-card platforms such as the NE40E LPUF-50 card follow a different expansion model. The M1C’s own page is clear that it is fixed-configuration, so the port decision happens at order time.

FAQ

Is the M1C a modular router? No. The comparison table states that the M1C is a fixed-configuration router that does not support flexible cards.

Can I order 16×10GE plus 22×GE? The page lists 16×10GE + 12×GE and 6×10GE + 22×GE as separate layouts. It does not list a combined 16×10GE + 22×GE SKU.

What does 1+1 mean here? The specification table lists the M1C power modules as “2, 1+1.” The page does not add module wattage or input range, so confirm those with the supplier.

Does the basic configuration include software? Every ordering description on the page ends with “without Software and Document.” Treat software and documentation as items to specify separately.

Is 172G the switching capacity? The page uses 172G for port capacity and 344 Gbit/s for switching capacity in its specification table. Quote each figure with its label.

Where can I see the rest of the NE8000 range? The data communication collection lists the NE8000 family alongside other routing and transmission products.


All specifications in this article are taken from the linked Boxintelecom product pages. Items not published on those pages are marked “not stated on page.” Boxintelecom is an independent B2B supplier and is not affiliated with Huawei; brand and model names identify compatible or original equipment.

NE8000 M1C Fixed-Port SKUs: 4×10GE+12GE vs 6×10GE+22GE vs 16×10GE+12GE

Short answer: the NetEngine 8000 M1C is a fixed-configuration 1U router, and the product page lists six ordering codes built from three port layouts and two power options. The port layouts are 4×10GE + 12×GE, 6×10GE + 22×GE and 16×10GE + 12×GE. Each layout is offered with 2×DC or 2×AC power, and every listed configuration is marked “without Software and Document.” Choose the layout by the number of 10GE links you need to terminate, then choose DC or AC to match the site feed.

All figures below come from the NetEngine 8000 M1C product page. Where the page is silent, this article says “not stated on page” instead of filling the gap.

What the page confirms about the M1C

The overview describes a 1U chassis with a 220 mm depth and “up to 172G port capacity.” The feature block repeats the 1U, 220 mm and 172 Gbps figures and adds “Max 16*10GE / GE.” The same block lists SRv6 and EVPN, a programmable network processor, Telemetry, and 1588v2 high-precision clock support.

The comparison table later on the page adds the following M1C values:

  • Switching capacity: 344 Gbit/s
  • Forwarding performance: 72 Mpps
  • Capacity density: 172 G/U
  • Power modules: 2, 1+1
  • Fans: 2 (integrated)
  • Dimensions: 44.45 × 442 × 220 mm (1 U)
  • Typical power consumption: 89.21 W
  • Weight in full configuration: 3.9 kg

Read the 172G and 344 Gbit/s figures as different published metrics, not as a contradiction. The overview and feature text use 172G for port capacity; the specification table uses 344 Gbit/s for switching capacity.

The page also describes the platform as a fixed-configuration router that “does not support flexible cards.” That row appears for the M1A, M1C and F1A columns in the comparison table. For a buyer, this is the key architectural statement on the page: the M1C is not a chassis you expand later with line cards. The port layout you order is the port layout you deploy.

The six ordering codes

The page publishes the following ordering information for the M1C. The descriptions below are taken from that table.

Ordering code Model Fixed interface Power Software and document
02354ARK CR8PM1CBASC0 4×10GE + 12×GE 2×DC Not included
02354ARL CR8PM1CBASC1 4×10GE + 12×GE 2×AC Not included
02354ARP CR8PM1CBASC2 6×10GE + 22×GE 2×DC Not included
02354ARQ CR8PM1CBASC3 6×10GE + 22×GE 2×AC Not included
02354ART CR8PM1CBASC4 16×10GE + 12×GE 2×DC Not included
02354ARU CR8PM1CBASC5 16×10GE + 12×GE 2×AC Not included

Two details in this table are easy to miss. One is the power count: it is always two, and the specification table describes the M1C power modules as “2, 1+1.” The other is the software note, which is part of every basic-configuration description. The page does not list a separate software SKU, license tier or document set, so treat “without Software and Document” as a line item to confirm in the quote rather than an assumption.

Reading the three port layouts

4×10GE + 12×GE

This layout gives 16 ports in total, with four at 10GE and twelve at GE. It fits a small aggregation point where the upstream is a pair of 10GE links and the downstream is a group of GE access or service ports. The page does not state how many of the twelve GE ports are optical versus electrical on this specific SKU; the overview only says the platform supports 10GE and GE service access over optical and electrical ports. Confirm the per-port media type before ordering optics.

6×10GE + 22×GE

This layout gives 28 ports in total: six at 10GE and twenty-two at GE. It carries the highest GE count of the three layouts, which makes it the layout to examine when the router is terminating many GE access links and only a handful of 10GE uplinks. The 10GE count is lower than the 16×10GE layout, so it is not a substitute for a design that needs sixteen 10GE ports.

16×10GE + 12×GE

This layout also gives 28 ports in total, but the balance changes to sixteen 10GE ports and twelve GE ports. It matches the page’s “Max 16*10GE / GE” statement and is the layout to look at when 10GE termination is the constraint and GE access is secondary. The trade-off is explicit in the table: you gain ten more 10GE ports than the 4×10GE layout, but you lose the larger GE pool of the 6×10GE layout.

The page does not list a 16×10GE + 22×GE combination. If a design needs both the maximum 10GE count and the maximum GE count, the published table does not offer that SKU.

DC or AC: what the page actually says

The ordering table gives two power variants for each port layout: 2×DC and 2×AC. The specification table adds “Power module: 2, 1+1” for the M1C. That is the full extent of the power information on this page. The page does not state the power-supply model numbers, the input voltage range, the wattage of each module, or whether a DC and an AC module can be mixed in the same chassis.

For a buyer, that means two questions belong in the quote request: which power module part number is fitted, and what input range it accepts. The 1+1 notation tells you the chassis is described with two power modules in a redundant arrangement; it does not tell you the feed voltage or the module rating.

M1C against the other platforms in the same table

The page’s specification table compares five platforms. The values below are copied from the M1C page, not from separate datasheets.

Parameter M1A M1C M1D-B F1A F8
Switching capacity 352 Gbit/s 344 Gbit/s 368 Gbps 2.4 Tbit/s 4 Tbps
Forwarding performance 72 Mpps 72 Mpps 276 Mpps 453 Mpps 906 Mpps
Capacity density 176 G/U 172 G/U 184 G/U 1200 G/U 492 G/U
Power modules 2, 1+1 (DC) 2, 1+1 2, 1+1 2, 1+1 DC up to 5+1; AC up to 3+3
Fans 3 (integrated) 2 (integrated) 3, 2+1 4, 3+1 1+1 up to 2+1
Dimensions (H × W × D) 44.45 × 442 × 220 mm 44.45 × 442 × 220 mm 44.5 × 442 × 220 mm 43.6 × 442 × 420 mm 575 × 442 × 482.8 mm
Typical power consumption 75 W 89.21 W 110 W (estimated) 350 W 1604 W (estimated)
Weight in full configuration 3.4 kg 3.9 kg 4.1 kg (estimated) 7.25 kg 120.5 kg (2T bundle)

The M1C and M1A are close on switching capacity and identical on forwarding performance, but the M1C is listed at 89.21 W against 75 W for the M1A, and 3.9 kg against 3.4 kg. The M1D-B moves to 368 Gbps and 276 Mpps in the same 1U footprint, with 3 fans in a 2+1 arrangement and a 110 W estimated draw. The F1A and F8 are different classes: 2.4 Tbit/s and 4 Tbps respectively, with the F8 occupying 13U and weighing 120.5 kg in the listed 2T bundle.

The table is an initial shortlist, not a per-model datasheet. The page does not publish interface media per port, routing scale, buffer size or noise for any of these columns.

What the page does not state

The following items are absent from the M1C page. They are listed here so they do not get invented in an internal design document:

  • Transceivers and optics: the ordering descriptions say “without Software and Document”; they do not list optics, and the page does not state which SFP or QSFP types are supported per port.
  • Per-port media type: the overview says 10GE and GE service access over optical and electrical ports, but the six-SKU table does not break each port down as optical or electrical.
  • Power module details: model number, wattage and input voltage range are not stated.
  • Routing and switching scale: MAC table size, VLAN count, route capacity and buffer size are not stated.
  • Environmental numbers: the feature text says “industrial wide temperature design,” but the M1C column of the specification table does not give a numeric operating-temperature range.
  • Noise and reliability: fan noise, MTBF and MTTR are not stated.
  • Warranty: the M1C page does not state a warranty period.
  • Software licensing: the page says the basic configuration is without software and document, but it does not describe license tiers or feature packs.
  • Rack accessories: rail kit, airflow direction and cable management are not stated.
  • End-of-life status: the page does not state an EoL or EoS date.

These are the points where a buyer can accidentally order the wrong configuration.

A quote checklist for the M1C

Before requesting a quote, put these six items in the request:

  1. Ordering code and model: for example, 02354ARQ / CR8PM1CBASC3 for 6×10GE + 22×GE with 2×AC power.
  2. Port media: confirm which 10GE and GE ports are optical and which are electrical on that exact SKU.
  3. Power: confirm the module part number and input range for the DC or AC variant you need.
  4. Software and documents: confirm what is included, since every listed basic configuration says “without Software and Document.”
  5. Optics: list the transceivers separately; they are not part of the basic configuration.
  6. Lead time and warranty: the NE8000 M1/M4 series page states a lead time of 5–20 days, but the M1C page itself does not state a warranty period.

If the requirement grows beyond a fixed 1U box, the NE8000 X8 and X4 listings sit in a different class, and flexible-card platforms such as the NE40E LPUF-50 card follow a different expansion model. The M1C’s own page is clear that it is fixed-configuration, so the port decision happens at order time.

FAQ

Is the M1C a modular router? No. The comparison table states that the M1C is a fixed-configuration router that does not support flexible cards.

Can I order 16×10GE plus 22×GE? The page lists 16×10GE + 12×GE and 6×10GE + 22×GE as separate layouts. It does not list a combined 16×10GE + 22×GE SKU.

What does 1+1 mean here? The specification table lists the M1C power modules as “2, 1+1.” The page does not add module wattage or input range, so confirm those with the supplier.

Does the basic configuration include software? Every ordering description on the page ends with “without Software and Document.” Treat software and documentation as items to specify separately.

Is 172G the switching capacity? The page uses 172G for port capacity and 344 Gbit/s for switching capacity in its specification table. Quote each figure with its label.

Where can I see the rest of the NE8000 range? The data communication collection lists the NE8000 family alongside other routing and transmission products.


All specifications in this article are taken from the linked Boxintelecom product pages. Items not published on those pages are marked “not stated on page.” Boxintelecom is an independent B2B supplier and is not affiliated with Huawei; brand and model names identify compatible or original equipment.

Back to newsبازگشت به اخبار

Post commentارسال دیدگاه

Comments are reviewed before publication.دیدگاه‌ها پس از بررسی منتشر می‌شوند.