(1).png?w=2643&h=1585){kind=logo}
FTTH Optical Transmission System 5G Network Model 8xE1 Optical Processing Board SSN1PFL1 for OSN3500 Fiber Optic Equipment
$1,519.00 USD
Frais d’expéditioncalculé à la caisse.
Quantité
Products Description
Description
OSN3500 8xE1 optical processing board, PFL1
The PFL1 is available in one functional version, N1.
The PFL1 can be installed in slots 1-8 and slots 11-16.
Processes E1 optical signals and overheads, and supports alarms, performance events, and maintenance features.
Consists of the client-side receive/transmit module, mapping/demapping module, interface converting module, logic and control module, clock module, and power module.
The PFL1 as a PDH processing board, which can be used on the OptiX OSN equipment series to receive/transmit and process 8xE1 optical signals.
The PFL1 is available in one functional version, N1.
The PFL1 can be installed in slots 1-8 and slots 11-16.
Processes E1 optical signals and overheads, and supports alarms, performance events, and maintenance features.
Consists of the client-side receive/transmit module, mapping/demapping module, interface converting module, logic and control module, clock module, and power module.
The PFL1 as a PDH processing board, which can be used on the OptiX OSN equipment series to receive/transmit and process 8xE1 optical signals.
|
Parameter
|
Value
|
|
|
Basic functions
|
PFL1 can Process 8xE1 optical signals.
|
|
|
Service processing
|
Receives/Transmits and processes 8 x E1 optical signals.
|
|
|
|
Supports transparent transmission in compliance with IEEE C37.94 to meet the transmission requirements of relay protection
equipment in the electric power industry. |
|
|
Optical port specifications
|
Supports I-2M optical ports, which comply with standards defined by Huawei.
|
|
|
Optical module specifications
|
Supports the detection and query of information about an optical module.
|
|
|
|
Allows setting the on/off state of a laser and supports the automatic laser shutdown (ALS) function.
|
|
|
|
Supports the usage and monitoring of eSFP optical modules, facilitating optical module maintenance.
|
|
|
Overhead processing
|
Processes path overheads at the VC-12 level, such as J2 bytes.
|
|
|
Alarms and performance events
|
Provides various alarms and performance events, facilitating equipment management and maintenance.
|
|
|
Maintenance features
|
Supports inloops and outloops at optical ports.
|
|
|
|
Supports warm resets and cold resets.Warm resets do not affect ongoing services.
|
|
|
|
Supports the query of board manufacturer information.
|
|
|
|
Supports in-service FPGA loading.
|
|
|
|
Supports board software upgrades without affecting ongoing services.
|
|
|
|
Supports the PRBS function.
|
|
|
|
Hot board swapping.
|
|
|
Protection scheme
|
TPS protection is not supported.
|
|
|
Parameters of the E1 optical interfaces of the OptiX OSN equipment
|
|
|
|
Nominal bit rate
|
2048 kbit/s
|
|
|
Code type
|
NRZ
|
|
|
Type of optical interface
|
I-2M
|
|
|
Transmission distance (km)
|
0 to 2
|
|
|
Operating wavelength range (nm)
|
Single-mode: 1260 to 1360
|
|
|
|
Multi-mode: 850
|
|
|
Type of fiber
|
Single-mode LC/Multi-mode LC
|
|
|
Launched optical power (dBm)
|
-15 to -8
|
|
|
Optical receiver sensitivity (dBm)
|
-23
|
|
|
Minimum overload (dBm)
|
-8
|
|
|
Minimum extinction ratio (dB)
|
8.2
|
|
