B2B Telecom Equipment Supplier — Request a Quote Todayتأمین‌کننده B2B تجهیزات مخابراتی — امروز درخواست قیمت کنید
B2B Telecom Equipment Supplier — Request a Quote Todayتأمین‌کننده B2B تجهیزات مخابراتی — امروز درخواست قیمت کنید
2G/3G/4G/5G Network Equipment — Nokia, Ericsson, Huawei, ZTE & Moreتجهیزات شبکه 2G/3G/4G/5G — Nokia، Ericsson، Huawei، ZTE و بیشتر
2G/3G/4G/5G Network Equipment — Nokia, Ericsson, Huawei, ZTE & Moreتجهیزات شبکه 2G/3G/4G/5G — Nokia، Ericsson، Huawei، ZTE و بیشتر
Worldwide Shipping
Sea freight, land transport, air freight

Huawei S5735-L vs S5735-S: Which Access Switch Fits Your Site Huawei S5735-L vs S5735-S: Which Access Switch Fits Your Site

Nov 10, 2026

Huawei S5735-L vs S5735-S: Which Access Switch Fits Your Site

Short answer: the letters after S5735 are not a generation marker, they are a power-and-cooling architecture. The S5735-L models documented on the product pages are fanless boxes with a built-in AC supply and, on the S5735-L48T4S-A1 page, explicitly "redundant power supply: not supported" [S1][S4]. The S5735-S models ship without a power module and take replaceable AC or DC supplies, including PoE+ and PoE++ modules, and they add 2 x 12GE stack ports [S3]. If the site needs PoE for cameras or APs, a hot-swappable supply, or a stack ring, the answer is S5735-S. If it is a quiet wiring closet with a handful of 10G uplinks, the S5735-L is the simpler buy.

All numbers below come from the Boxintelecom product pages. Where a page is silent, the text says so instead of filling the gap.


1. The concrete difference in one table

Item S5735-L8T4X-QA-V2 S5735-L48T4S-A1 S5735-S24T4XE-V2
Fixed ports 8 x 10/100/1000Base-T + 4 x 10GE SFP+ Port count stated in the model name; page table gives thermal/mechanical data only 24 x 10/100/1000Base-T + 4 x 10GE SFP+ + 2 x 12GE stack ports
Power supply Built-in AC Redundant power supply not supported Without power module (modular)
Rated input 100–240 V AC, 50/60 Hz not stated in the table not stated in the table
Max power consumption 16.92 W 50.4 W not stated on page
Typical power consumption not stated 43.3 W not stated on page
Cooling Fanless, natural heat dissipation Noise 48 dB(A) acoustic power, 36.2 dB(A) acoustic pressure not stated on page
Height 1 U 1 U not stated on page
Dimensions (H x W x D) 43.6 x 250 x 180 mm 43.6 x 442.0 x 220.0 mm (body); 90.0 x 550 x 360 mm packed not stated on page
Operating temperature -5 °C to +50 °C at 0–1800 m -5 °C to +50 °C long-term, -5 °C to +55 °C short-term at 0–1800 m not stated on page
MTBF not stated 56.7 years not stated on page
Source S1 S4 S3

The blank cells are real blanks on the pages, not omissions in this article. The S5735-S page publishes the port matrix and the module catalogue; it does not publish thermal or dimensional figures.


2. What the S5735-L actually is

2.1 A fanless, sealed box

The S5735-L8T4X-QA-V2 page lists fanless operation and natural heat dissipation, a maximum power draw of 16.92 W, and an operating window of -5 °C to +50 °C up to 1,800 m, derating by 1 °C for every 220 m above that [S1]. Storage is rated -40 °C to +70 °C and humidity 5% to 95% non-condensing [S1]. For a classroom, a small office or a retail back room, that combination means no fan filter to clean and no airflow to design.

The same page lists surge protection of ±7 kV common mode on service ports and ±6 kV differential / ±6 kV common mode on the power port [S1]. That is the kind of number you quote when the switch sits in a cabinet fed by an unshielded riser.

2.2 No redundant supply

The S5735-L48T4S-A1 page states, in the specification table, "Redundant power supply: Not supported" [S4]. It also publishes an availability figure above 0.99999, an MTBF of 56.7 years and an MTTR of 2 hours [S4]. Read those two rows together: the platform is designed to be reliable, but it is not designed to survive a power supply failure without downtime. If the site has a single-feed cabinet and a maintenance window long enough to swap a switch, that is an acceptable trade. If not, this is the row that disqualifies the model.

2.3 A second L variant with a very different power profile

The S5735-L8P2T4X-A-V2 page describes a different animal: 8 x 10GE electric ports, 2 x 10GE SFP+, 4 x 1GE electric, 2 x AC power supplies and 4 fan boxes with port-side blowing, a switching capacity up to 2.56 Tbps and a forwarding rate up to 1440 Mpps, 64K MAC addresses, 16K IPv4 routes, 6K IPv6 routes, 9 KB jumbo frames and 4,094 VLAN IDs, at 40 W typical and 60 W maximum with an MTBF above 200,000 hours [S2]. Note that this page states two AC supplies and four fan boxes — a cooled, redundant design — while the L8T4X-QA-V2 page states fanless with built-in AC [S1][S2]. The two "L" pages describe genuinely different hardware, so quote the exact model code, not just "S5735-L".


3. What the S5735-S actually is

The S5735-S page is a family sheet [S3]. It lists six chassis in one table:

  • S5735-S24T4XE-V2 — 24 x GE, 4 x 10GE SFP+, 2 x 12GE stack, without power module
  • S5735-S24P4XE-V2 — same plus PoE+
  • S5735-S24U4XE-V2 — same plus PoE++
  • S5735-S48T4XE-V2 — 48 x GE, 4 x 10GE SFP+, 2 x 12GE stack
  • S5735-S48P4XE-V2 — same plus PoE+
  • S5735-S48U4XE-V2 — same plus PoE++

The power module catalogue on the same page is the part that matters for budgeting [S3]:

Module Rating
PAC180S12-CN 180 W AC
PAC600S12-PB 600 W AC and 240 V DC
PDC1K2S12-CE 1200 W DC
PAC600S56-EB 600 W AC PoE
PAC1000S56-EB 1000 W AC PoE
PDC1000S56-EB 1000 W DC PoE

Two consequences follow directly. First, "without power module" means the switch is not usable out of the box — the PSU is a separate line item on every S-model order. Second, the PoE models need a PoE-rated module, not the 180 W base module, once the port load is real.

The page also lists the licence SKUs (N1-S57S-M-Lic, N1-S57S-F-Lic, N1-S57S-A-Lite-Lic and their SnS variants) [S3]. Those are software items, not hardware, and they belong on the same purchase order or the switch arrives with base functionality only.


4. Decision rules that survive an audit

  1. Ask for the exact model code. "S5735-L" covers both a fanless 16.92 W box and a 60 W unit with two supplies and four fans [S1][S2]. Model code or nothing.
  2. Count the power modules on S models. Each S5735-S chassis is listed "without power module" [S3]; a quote that omits the PSU is incomplete.
  3. Match the PoE module to the PoE class. PoE+ and PoE++ chassis exist in the S family [S3], and the PoE-rated modules are separately listed [S3].
  4. Check the stack requirement. S5735-S carries 2 x 12GE stack ports [S3]; the L pages in this set do not list stack ports.
  5. Check the temperature window against the room. L8T4X-QA-V2 and L48T4S-A1 are both -5 °C to +50 °C at 0–1800 m, with the L48T4S-A1 allowing -5 °C to +55 °C short-term [S1][S4].
  6. Check the noise requirement. The L48T4S-A1 page publishes 48 dB(A) acoustic power and 36.2 dB(A) acoustic pressure [S4]; the L8T4X-QA-V2 page states fanless [S1]. If the switch goes in a room people sit in, that difference decides the model.

5. Recommendation

  • Quiet closet, 8 copper ports, 4 x 10G uplinks, no PoE: S5735-L8T4X-QA-V2 — fanless, 16.92 W maximum, built-in AC [S1].
  • 48-port access with no redundancy requirement: S5735-L48T4S-A1, but plan the maintenance window because redundant supply is not supported [S4].
  • PoE for cameras or access points: S5735-S24P4XE-V2 or S48P4XE-V2 with a PAC600S56-EB / PAC1000S56-EB PoE module [S3].
  • Stacked closet with 10G uplinks and a hot-swap supply: S5735-S24T4XE-V2 with the PAC600S12-PB module [S3].
  • Any bid that cannot state the PSU model and the licence SKU: treat it as incomplete, not as a discount.

6. Where to buy

  • S5735-L8T4X-QA-V2 (8 x GE + 4 x 10GE SFP+, fanless, built-in AC): https://boxintelecom.com/products/cloudengine-s5700-series-switches-s5735-l8t4x-qa-v2-98012073-8*10-100-1000base-t-ports-ethernet-enterprise-switch
  • S5735-L8P2T4X-A-V2 (8 x 10GE + 2 x 10GE SFP+ + 4 x 1GE, dual AC, 2.56 Tbps): https://boxintelecom.com/products/cloudengine-series-s5735-l8p2t4x-a-v2-98011991-1000base-enterprise
  • S5735-L48T4S-A1 (48-port, 43.6 x 442 x 220 mm, 50.4 W max): https://boxintelecom.com/products/cloudengine-series-s5735-l48t4s-a1-98011334-1000base-enterprise
  • S5735-S24T4XE-V2 family sheet with power modules and licences: https://boxintelecom.com/products/cloudengine-series-s5735-s24t4xe-v2-98012016-1000base-s5735-s24t4x
  • S5735-L1 PoE model, S5735-L24P4S-A1: https://boxintelecom.com/products/best-price-s5735-l1series-410-100-1000base-t-4ge-sfp-ports-poe-ac-power-s5735-l24p4s-a1

Put the model code, the PSU module and the licence in one RFQ; the store replies within 24 hours.


Sources

  • [S1] S5735-L8T4X-QA-V2 specification table — https://boxintelecom.com/products/cloudengine-s5700-series-switches-s5735-l8t4x-qa-v2-98012073-8*10-100-1000base-t-ports-ethernet-enterprise-switch
  • [S2] S5735-L8P2T4X-A-V2 specification table — https://boxintelecom.com/products/cloudengine-series-s5735-l8p2t4x-a-v2-98011991-1000base-enterprise
  • [S3] S5735-S series port matrix, power modules and licences — https://boxintelecom.com/products/cloudengine-series-s5735-s24t4xe-v2-98012016-1000base-s5735-s24t4x
  • [S4] S5735-L48T4S-A1 thermal and mechanical table — https://boxintelecom.com/products/cloudengine-series-s5735-l48t4s-a1-98011334-1000base-enterprise

Prices are not published on these pages; the store quotes by request.


Publisher notes (not for publication)

Internal links to add in the body: - → https://boxintelecom.com/collections/data-communication-products (anchor: "data communication switches") - → /posts/04-100g-qsfp28-reach-selection(发布后按最终路径替换) (anchor: "choosing 10G/100G uplink optics") - → https://boxintelecom.com/collections/switching-power-supply-power-module (anchor: "switch power modules")

Keyword density check: s5735-l 30x, s5735-s 23x in 1,334 words ≈ 2.2% / 1.7%. Both are model codes, used as nouns; no keyword block paragraphs.

Suggested images: 1. Rear view of the S5735-S chassis showing the empty power-module bay — caption "S5735-S ships without a power module". 2. Fanless S5735-L8T4X-QA-V2 top view with the 4 x 10GE SFP+ cages highlighted — caption "16.92 W maximum, natural heat dissipation". 3. Comparison graphic of acoustic numbers: 48 dB(A) / 36.2 dB(A) versus fanless — caption with the S4 figures.

Huawei S5735-L vs S5735-S: Which Access Switch Fits Your Site

Short answer: the letters after S5735 are not a generation marker, they are a power-and-cooling architecture. The S5735-L models documented on the product pages are fanless boxes with a built-in AC supply and, on the S5735-L48T4S-A1 page, explicitly "redundant power supply: not supported" [S1][S4]. The S5735-S models ship without a power module and take replaceable AC or DC supplies, including PoE+ and PoE++ modules, and they add 2 x 12GE stack ports [S3]. If the site needs PoE for cameras or APs, a hot-swappable supply, or a stack ring, the answer is S5735-S. If it is a quiet wiring closet with a handful of 10G uplinks, the S5735-L is the simpler buy.

All numbers below come from the Boxintelecom product pages. Where a page is silent, the text says so instead of filling the gap.


1. The concrete difference in one table

Item S5735-L8T4X-QA-V2 S5735-L48T4S-A1 S5735-S24T4XE-V2
Fixed ports 8 x 10/100/1000Base-T + 4 x 10GE SFP+ Port count stated in the model name; page table gives thermal/mechanical data only 24 x 10/100/1000Base-T + 4 x 10GE SFP+ + 2 x 12GE stack ports
Power supply Built-in AC Redundant power supply not supported Without power module (modular)
Rated input 100–240 V AC, 50/60 Hz not stated in the table not stated in the table
Max power consumption 16.92 W 50.4 W not stated on page
Typical power consumption not stated 43.3 W not stated on page
Cooling Fanless, natural heat dissipation Noise 48 dB(A) acoustic power, 36.2 dB(A) acoustic pressure not stated on page
Height 1 U 1 U not stated on page
Dimensions (H x W x D) 43.6 x 250 x 180 mm 43.6 x 442.0 x 220.0 mm (body); 90.0 x 550 x 360 mm packed not stated on page
Operating temperature -5 °C to +50 °C at 0–1800 m -5 °C to +50 °C long-term, -5 °C to +55 °C short-term at 0–1800 m not stated on page
MTBF not stated 56.7 years not stated on page
Source S1 S4 S3

The blank cells are real blanks on the pages, not omissions in this article. The S5735-S page publishes the port matrix and the module catalogue; it does not publish thermal or dimensional figures.


2. What the S5735-L actually is

2.1 A fanless, sealed box

The S5735-L8T4X-QA-V2 page lists fanless operation and natural heat dissipation, a maximum power draw of 16.92 W, and an operating window of -5 °C to +50 °C up to 1,800 m, derating by 1 °C for every 220 m above that [S1]. Storage is rated -40 °C to +70 °C and humidity 5% to 95% non-condensing [S1]. For a classroom, a small office or a retail back room, that combination means no fan filter to clean and no airflow to design.

The same page lists surge protection of ±7 kV common mode on service ports and ±6 kV differential / ±6 kV common mode on the power port [S1]. That is the kind of number you quote when the switch sits in a cabinet fed by an unshielded riser.

2.2 No redundant supply

The S5735-L48T4S-A1 page states, in the specification table, "Redundant power supply: Not supported" [S4]. It also publishes an availability figure above 0.99999, an MTBF of 56.7 years and an MTTR of 2 hours [S4]. Read those two rows together: the platform is designed to be reliable, but it is not designed to survive a power supply failure without downtime. If the site has a single-feed cabinet and a maintenance window long enough to swap a switch, that is an acceptable trade. If not, this is the row that disqualifies the model.

2.3 A second L variant with a very different power profile

The S5735-L8P2T4X-A-V2 page describes a different animal: 8 x 10GE electric ports, 2 x 10GE SFP+, 4 x 1GE electric, 2 x AC power supplies and 4 fan boxes with port-side blowing, a switching capacity up to 2.56 Tbps and a forwarding rate up to 1440 Mpps, 64K MAC addresses, 16K IPv4 routes, 6K IPv6 routes, 9 KB jumbo frames and 4,094 VLAN IDs, at 40 W typical and 60 W maximum with an MTBF above 200,000 hours [S2]. Note that this page states two AC supplies and four fan boxes — a cooled, redundant design — while the L8T4X-QA-V2 page states fanless with built-in AC [S1][S2]. The two "L" pages describe genuinely different hardware, so quote the exact model code, not just "S5735-L".


3. What the S5735-S actually is

The S5735-S page is a family sheet [S3]. It lists six chassis in one table:

  • S5735-S24T4XE-V2 — 24 x GE, 4 x 10GE SFP+, 2 x 12GE stack, without power module
  • S5735-S24P4XE-V2 — same plus PoE+
  • S5735-S24U4XE-V2 — same plus PoE++
  • S5735-S48T4XE-V2 — 48 x GE, 4 x 10GE SFP+, 2 x 12GE stack
  • S5735-S48P4XE-V2 — same plus PoE+
  • S5735-S48U4XE-V2 — same plus PoE++

The power module catalogue on the same page is the part that matters for budgeting [S3]:

Module Rating
PAC180S12-CN 180 W AC
PAC600S12-PB 600 W AC and 240 V DC
PDC1K2S12-CE 1200 W DC
PAC600S56-EB 600 W AC PoE
PAC1000S56-EB 1000 W AC PoE
PDC1000S56-EB 1000 W DC PoE

Two consequences follow directly. First, "without power module" means the switch is not usable out of the box — the PSU is a separate line item on every S-model order. Second, the PoE models need a PoE-rated module, not the 180 W base module, once the port load is real.

The page also lists the licence SKUs (N1-S57S-M-Lic, N1-S57S-F-Lic, N1-S57S-A-Lite-Lic and their SnS variants) [S3]. Those are software items, not hardware, and they belong on the same purchase order or the switch arrives with base functionality only.


4. Decision rules that survive an audit

  1. Ask for the exact model code. "S5735-L" covers both a fanless 16.92 W box and a 60 W unit with two supplies and four fans [S1][S2]. Model code or nothing.
  2. Count the power modules on S models. Each S5735-S chassis is listed "without power module" [S3]; a quote that omits the PSU is incomplete.
  3. Match the PoE module to the PoE class. PoE+ and PoE++ chassis exist in the S family [S3], and the PoE-rated modules are separately listed [S3].
  4. Check the stack requirement. S5735-S carries 2 x 12GE stack ports [S3]; the L pages in this set do not list stack ports.
  5. Check the temperature window against the room. L8T4X-QA-V2 and L48T4S-A1 are both -5 °C to +50 °C at 0–1800 m, with the L48T4S-A1 allowing -5 °C to +55 °C short-term [S1][S4].
  6. Check the noise requirement. The L48T4S-A1 page publishes 48 dB(A) acoustic power and 36.2 dB(A) acoustic pressure [S4]; the L8T4X-QA-V2 page states fanless [S1]. If the switch goes in a room people sit in, that difference decides the model.

5. Recommendation

  • Quiet closet, 8 copper ports, 4 x 10G uplinks, no PoE: S5735-L8T4X-QA-V2 — fanless, 16.92 W maximum, built-in AC [S1].
  • 48-port access with no redundancy requirement: S5735-L48T4S-A1, but plan the maintenance window because redundant supply is not supported [S4].
  • PoE for cameras or access points: S5735-S24P4XE-V2 or S48P4XE-V2 with a PAC600S56-EB / PAC1000S56-EB PoE module [S3].
  • Stacked closet with 10G uplinks and a hot-swap supply: S5735-S24T4XE-V2 with the PAC600S12-PB module [S3].
  • Any bid that cannot state the PSU model and the licence SKU: treat it as incomplete, not as a discount.

6. Where to buy

  • S5735-L8T4X-QA-V2 (8 x GE + 4 x 10GE SFP+, fanless, built-in AC): https://boxintelecom.com/products/cloudengine-s5700-series-switches-s5735-l8t4x-qa-v2-98012073-8*10-100-1000base-t-ports-ethernet-enterprise-switch
  • S5735-L8P2T4X-A-V2 (8 x 10GE + 2 x 10GE SFP+ + 4 x 1GE, dual AC, 2.56 Tbps): https://boxintelecom.com/products/cloudengine-series-s5735-l8p2t4x-a-v2-98011991-1000base-enterprise
  • S5735-L48T4S-A1 (48-port, 43.6 x 442 x 220 mm, 50.4 W max): https://boxintelecom.com/products/cloudengine-series-s5735-l48t4s-a1-98011334-1000base-enterprise
  • S5735-S24T4XE-V2 family sheet with power modules and licences: https://boxintelecom.com/products/cloudengine-series-s5735-s24t4xe-v2-98012016-1000base-s5735-s24t4x
  • S5735-L1 PoE model, S5735-L24P4S-A1: https://boxintelecom.com/products/best-price-s5735-l1series-410-100-1000base-t-4ge-sfp-ports-poe-ac-power-s5735-l24p4s-a1

Put the model code, the PSU module and the licence in one RFQ; the store replies within 24 hours.


Sources

  • [S1] S5735-L8T4X-QA-V2 specification table — https://boxintelecom.com/products/cloudengine-s5700-series-switches-s5735-l8t4x-qa-v2-98012073-8*10-100-1000base-t-ports-ethernet-enterprise-switch
  • [S2] S5735-L8P2T4X-A-V2 specification table — https://boxintelecom.com/products/cloudengine-series-s5735-l8p2t4x-a-v2-98011991-1000base-enterprise
  • [S3] S5735-S series port matrix, power modules and licences — https://boxintelecom.com/products/cloudengine-series-s5735-s24t4xe-v2-98012016-1000base-s5735-s24t4x
  • [S4] S5735-L48T4S-A1 thermal and mechanical table — https://boxintelecom.com/products/cloudengine-series-s5735-l48t4s-a1-98011334-1000base-enterprise

Prices are not published on these pages; the store quotes by request.


Publisher notes (not for publication)

Internal links to add in the body: - → https://boxintelecom.com/collections/data-communication-products (anchor: "data communication switches") - → /posts/04-100g-qsfp28-reach-selection(发布后按最终路径替换) (anchor: "choosing 10G/100G uplink optics") - → https://boxintelecom.com/collections/switching-power-supply-power-module (anchor: "switch power modules")

Keyword density check: s5735-l 30x, s5735-s 23x in 1,334 words ≈ 2.2% / 1.7%. Both are model codes, used as nouns; no keyword block paragraphs.

Suggested images: 1. Rear view of the S5735-S chassis showing the empty power-module bay — caption "S5735-S ships without a power module". 2. Fanless S5735-L8T4X-QA-V2 top view with the 4 x 10GE SFP+ cages highlighted — caption "16.92 W maximum, natural heat dissipation". 3. Comparison graphic of acoustic numbers: 48 dB(A) / 36.2 dB(A) versus fanless — caption with the S4 figures.

Back to newsبازگشت به اخبار

Post commentارسال دیدگاه

Comments are reviewed before publication.دیدگاه‌ها پس از بررسی منتشر می‌شوند.